AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 220)

41-001343-01 Rev 03, Release 3.2.2 4-57
For 6739i:
19 Press Done (3 times) to return to the VLAN Settings menu.
To set VLAN ID and priority for PC Port (Port 1):
20
Select PC Port VLAN.
Note: PC Port parameters are not applicable to the 6730i IP Phone.
21 Select PC Port VLAN ID.
22 Enter a value from 1 to 4095 to specify the VLAN ID for the PC Port.
Default is 4095.
Note: If you set the PC Port VLAN ID (Port 1) to 4095, all untagged packets are sent to this port. The
following is an example of configuring the phone on a VLAN where all untagged packets are sent to
the PC Port (passthrough port).
Example
You enable tagging on the phone port as normal but set the passthrough port (PC Port) to
4095. The following example sets the phone to be on VLAN 3 but the passthrough port is
configured as untagged.
VLAN Settings->VLAN Enable: Yes
VLAN Settings->Phone VLAN->Phone VLAN ID: 3
VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095
23 Press Done to save the change.
24 Select PC Port Priority.
25 Select a PC Port VLAN priority value from 0 to 7 for the PC Port.
Default is 0.
26 Press Done (4 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
27 Select Restart.
IP Phone UI
Step Action
1 Press the Options key on the phone to enter the Options List.
2 Press Advanced. A keyboard displays.
3 Enter the Administrator password using the keyboard. Default is “22222”.
4 Press Network.
5 Press to scroll to the next screen.
6 Press Ethernet & VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
IP Phone UI
Step Action