AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual

Page 1007

41-001343-01 Rev 03, Release 3.2.2

C-15

#sip dial plan: [01]xxx|[2-8]xxxx|91xxxxxxxxxx

# accecpt any 4 digit number beginning

# with a 0 or 1, any 5 digit number

# beginning with a number between 2 and 8

# (inclusive) or a 12 digit number

# beginning with 91

#sip dial plan terminator: 1 # enable sending of the "#" symbol to

# to the proxy in the dial string

#-------------------------------------------------------------------

General SIP Settings

# ====================

#sip session timer: 90 # enable support of RFC4028, the default

# value of 0 disables this functionality

#sip transport protocol: 0 # use UDP (1), TCP (2) or both (0) for sip

# messaging

#sip use basic codecs: 1 # limit codecs to G711 and G729

#sip out-of-band dtmf: 0 # turn off support for RFC2833 (on by

# default)

# Global SIP User Settings

# ========================

# Notes:

# These settings are used as the default configuration for the hard

# key lines on the phone. That is:

# L1 to L4 on the 6757i and 6757iCT

# L1 to L3 on the 6753i

# These can be over-ridden on a per-line basis using the per-line