AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 164)

41-001343-01 Rev 03, Release 3.2.2 4-1
Chapter 4
Configuring Network and
Session Initiation Protocol (SIP) Features
About this chapter
Introduction
This chapter provides the information required to configure the Network and Global SIP features
on the IP Phone. These features are password protected on the IP Phone UI and the Aastra Web UI.
This chapter also includes procedures for configuring the Network and Global SIP features via the
configuration files, the IP Phone UI, and the Aastra Web UI where applicable.
Topics
This chapter covers the following topics:
Note: The IP Phone User Interface (UI) procedures in the remainder of
this Guide use the keys on the 9480i, 9480i CT, 6735i, 6737i, 6739i,
6755i, 6757i, and/or 6757i CT when configuring Administrator Options.
For information on using the 9143i, 6730i, 6731i, and 6753i keys to
configure the Administrator Options, see Chapter 2, the section, “Using
the Options Key” on page 2-5 .
Topic Page
Overview page 4-2
Network Settings page 4-3
Basic Network Settings page 4-3
Advanced Network Settings page 4-30
Global SIP Settings page 4-65
Basic SIP Settings page 4-66
Advanced SIP Settings (optional) page 4-83
Real-time Transport Protocol (RTP) Settings page 4-90
RTCP Summary Reports page 4-100
Autodial Settings page 4-101
Configuration Server Protocol page 4-104
Configuring the Configuration Server Protocol page 4-104