AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 900)

41-001343-01 Rev 03, Release 3.2.2 A-169
SIP Diversion Display
Global Setting
Parameter–
bellcore cadence dr5 Configuration Files aastra.cfg, .cfg, .cfg
Description Sets the cadence for Bellcore-dr5.
Note: You can define up to 8 cadence rings. The value of -1 indicates “do not
repeat”.
Format Integer
Default Value 500,-1
Range Not Applicable
Example bellcore cadence dr5: 500,-1
Parameter –
sip diversion display Configuration Files aastra.cfg, .cfg, .cfg
Description Global parameter that enables/disables the display of the Caller ID and/
or caller name, and reason for diversion on the phones LCD for an
outgoing call that is being diverted to another destination. The phone
that receives the diverted call displays the Caller ID of the original call
destination.
Note: You must restart the phone after setting a value for this parameter.
Format Boolean
Default Value 1
Range 0 (disabled - do not display diversion information to the phone’s LCD)
1 (enabled - display diversion information to the phone’s LCD)
Example sip diversion display: 0