AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 828)

41-001343-01 Rev 03, Release 3.2.2 A-97
Per-Line Setting
Custom Ad-Hoc Conference
Parameter –
sip lineN centralized conf
Conference Server URI
(in Web UI)
Aastra Web UI Advanced->Line <1 thru 9>->
Basic SIP Network Settings
Configuration Files aastra.cfg, .cfg, .cfg
Description Enable or disable per-line SIP centralized conferencing for an IP phone
as follows:
• To disable centralized conferencing, leave this field empty (blank).
• To enable SIP centralized conferencing on a specific line, do one of
the following actions:
— If you have specified a proxy server/registrar server, then to
reach the media server via the proxy server, set this field to
one of the following:
conf (Sylantro server), or
Conference (Broadsoft server)
By setting this field to conf , you specify conf@
_address>: . For example, if the proxy server address
is 206.229.26.60 and the proxy port used is 10060, then by setting
this parameter to conf, you are specifying the following:
[email protected]:10060.
— To reach the media server using a different address/port than
that specified by the proxy, set this field to the following:
conf@:
Format String
Default Value Blank
Examples sip line3 centralized conf: conf
Parameter –
custom adhoc conference
Configuration Files aastra.cfg, .cfg, .cfg
Description Enables/disables the phone to interoperate with Genband Call Manager
for ad-hoc conference.
Format Boolean
Default Value 0 (disabled)
Range 0 (disabled)
1 (enabled)
Example custom adhoc conference: 1