AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual

Page 1003

41-001343-01 Rev 03, Release 3.2.2

C-11

# The "aastra.cfg" file configures the settings server wide, the “.cfg” file contains model specific

# information (for example, “6757i.cfg”), while the ".cfg" file configures only the phone with the MAC

# address for which the file is named (for example, "00085d0304f4.cfg"). The

# settings in the "aastra.cfg" file will be overridden by settings in the .cfg file, and settings in the

# ".cfg" file override both settings in the “.cfg” and the “aastra.cfg” files.

#-------------------------------------------------------------------

# DHCP Setting

# ============

#dhcp: 1 # DHCP enabled.

# DHCP:

# 0 = false, means DHCP is disabled.

# 1 = true, means DHCP is enabled.

# Notes:

# DHCP is normally set from the Options list on the phone or

# the web interface

# If DHCP is disabled, the following network settings will

# have to be configured manually either through the configuration

# files, the Options List in the phone, or the Web Client: IP

# Address (of the phone), Subnet Mask, Gateway, DNS, and TFTP

# Server.

#-------------------------------------------------------------------

# Network Settings

# ================

# Notes: If DHCP is enabled, you do not need to set these network

# settings. Although depending on you DHCP server configuration you

# may still have to set the dns address.