AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 737)

A-6 41-001343-01 Rev 03, Release 3.2.2
Setting Parameters in Configuration Files
You can set specific configuration parameters in the configuration files for configuring you IP
phone. The aastra.cfg, .cfg, and .cfg files are stored on the server. The
aastra.cfg
file stores global IP phone configuration settings. The .cfg file contains
model specific information.The .cfg file stores configuration settings specific to the IP
phone with that MAC address. When you restart the IP phone, these files are downloaded to the
phone.
If you make changes to the phone configuration, the changes are stored in a local configuration
on the phone (not on the server).
Configuration changes made to the .cfg file override the configuration settings in the
aastra.cfg
file. Configuration changes made to the .cfg file override the configuration
settings in the .cfg and aastra.cfg files.
Reference
For information about configuration file precedence, see Chapter 1, the section, “Configuration
File Precedence” on page -43.
This section includes the following types of configurable parameters:
• Operational, Basic, and Advanced Parameters on page A-7
• Mapping Key Settings on page A-195
• Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters on
page A-200
• Advanced Operational Parameters on page A-237
• Troubleshooting Parameters on page A-253
Note: Configuration parameters that you enter in the configuration files
are NOT case sensitive.