AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 844
41-001343-01 Rev 03, Release 3.2.2
A-113
Parameter –
sips local certificate
Local Certificate Filename
(in Web UI)
Aastra Web UI
Advanced Settings->TLS Support
Configuration Files
aastra.cfg,
Description
Allows you to specify the Local Certificate file to use when the phone uses
the TLS transport protocol to setup a call.
This parameter is required when configuring TLS (optional for Persistent
TLS.)
You can use this parameter in three ways:
•
To download no certificates
•
To download a certificate from the original configuration server
•
To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at
the end of the string. For example:
sips local certificate:ftp://admin:[email protected]:50/path/
phonesLocalCert.pem
where “path” is the directory and “phonesLocalCert.pem” is the filename. If
you do not specify a filename, the download fails.
See examples for each below.
Note: The certificate file must use the format “.pem”. To create specific
certificate files to use on your IP phone, contact Aastra Technical Support.
Format
Default Value
Not Applicable
Range
Not Applicable
Example
The following example downloads no local certificate file:
sips local certificate:
The following example downloads the local certificate file from the original
configuration server.
sips local certificate: phonesLocalCert.pem
The following example uses FTP to download the firmware file
“phonesLocalCert.pem” (local certificate file) from the “path” directory on
server 1.2.3.4 using port 50:
sips local certificate:ftp://admin:[email protected]:50/path/
phonesLocalCert.pem