Programming, Operation manual – ACU-RITE MILLPWR 3 Axes User Manual

Page 63

PROGRAMMING

MILLPWR

Operation Manual

3-27

If the program is saved in a different directory:

•

Press the

CANCEL

softkey.

•

Press

PROGRAM FUNCTIONS

softkey.

•

Press the

DIRECTORY

softkey.

•

Now press the

SELECT DIRECTORY

softkey.

•

Using the arrow keys, highlight the directory that contains the program you want to
load.

•

Press the

SELECT DIRECTORY

softkey again. The "DIRECTORY" screen will disap-

pear. Now that you've selected the appropriate directory, you can load your program.

•

Press the

LOAD

softkey. The directory you chose should appear.

•

Highlight the program you want to load, then press the

LOAD

softkey. The program

you selected should now appear on your screen.

From a 3

" floppy disk:

•

Save, then clear, any open programs.

•

From the PGM screen, press the

PROGRAM FUNCTIONS

softkey.

•

Insert the 3

" floppy disk containing the file you want to load into the floppy disk

drive. Located in the lower right-hand corner of the operator console.

•

Press the

DIRECTORY

softkey and then press the

SELECT DIRECTORY

softkey.

•

Press the

USE FLOPPY

softkey. The “A:” directory and any sub-directories

should appear.

•

Select the directory that contains your program and then press the

USE

softkey.

•

Press the

LOAD

softkey.

•

Press the format key until MPT is displayed.

•

Using the arrow keys, highlight the program you want to load. Press the

LOAD

soft-

key. The program you selected should now appear on your screen.