Program steps – ACU-RITE MILLPWR 3 Axes User Manual
Page 159
PROGRAM STEPS
MILLPWR
®
Operation Manual
5-63
Change Steps
The "Change Steps" feature gives you the ability to change or edit the depth, offset
and feed rate of several steps simultaneously.
Note:
You can use this feature from anywhere within your program—you don't need
to highlight a specific step within the step range.
To use the “Change Steps” feature:
•
From the PGM screen, press the
STEP FUNCTIONS
softkey.
•
Press the
CHANGE STEPS
softkey.
•
Enter the first and last step numbers that you would like to change in the “Step
Range” field.
•
Highlight each field that you want to change and enter the new data.
•
Press the
USE
key.
Note:
It’s a beneficial to highlight the changed steps in the program sequence, then
press the
ENTER
key. Each step should include the new settings.