Program steps – ACU-RITE MILLPWR 3 Axes User Manual

Page 111

Text mode
Original mode

PROGRAM STEPS

MILLPWR

Operation Manual

5-15

Select the finish cut’s direction. Press the

softkey for a clockwise direction or

the

CCW

softkey for a counter-clockwise direction.

Enter a stepover percentage (how much you want your tool to overlap on each pass).

•

Press the

USE

key.

Note:

If the tool size and type listed in the "Tool" field are incorrect, change the tool set-
tings before running your program (refer to Programming a Tool Step).