ACU-RITE MILLPWR 3 Axes - Manual (Page 179)

CALCULATOR
MILLPWR ®
Operation Manual 6-17
• Highlight the arc.
• Press the RETURN FEATURE softkey. MILLPWR will
automatically add an arc step to your program and
place the arc's information into the form.
• Press the USE key to accept the arc step into your
part program.
• Press the LINE key. This line ends at datum,
so enter “X2 = 0” and “Y2 = 0” for the “To” point,
and press the
USE key to keep the line.
The contour is now complete.