ACU-RITE MILLPWR 3 Axes - Manual (Page 216)

SETUP
MILLPWR ®
Operation Manual 7-36
The display test is used to verify that the system’s “sleep” mode is working properly
and that all of the pixels in the LCD are functioning.
Pressing the “Sleep Test” softkey will activate the sleep mode (the screen will go
blank). Press any key or move the table to return the screen to its normal view.
Each time you press the “Color Test” softkey, the display will flash a different color.
Keep pressing the softkey until the sequence is complete and the screen returns to the
normal view.
Display Test
To run the display test:
• From the Diagnostics screen, highlight "Display Test" and press ENTER .
• Press either the SLEEP TEST or COLOR TEST softkey.
• If you pressed the SLEEP TEST softkey, press any key or move the table to return
the screen to its normal view.
If you selected the COLOR TEST softkey, press it repeatedly and scroll through the
color sequence (black, white, red, green, blue). The test is complete when the
normal view returns.
• Press the EXIT TEST softkey to close the “Display Test” screen.
• Continue with Diagnostics or press the USE NEW SETTINGS softkey.