Program steps, Operation manual – ACU-RITE MILLPWR 3 Axes User Manual
Page 123
PROGRAM STEPS
MILLPWR
®
Operation Manual
5-27
•
For “Direction,” press the
CW
softkey for clockwise or the
CCW
softkey for a counter-clockwise direction.
•
Enter the table’s feed rate.
•
If you would like to program a finish cut, press the
MORE
softkey.
Enter the amount of material to be removed during the finish
cut.
Enter the feed rate for the finish cut.
Select the finish cut's direction. Press the
CW
softkey for clockwise or the
CCW
softkey
for a counter-clockwise direction.
Enter a stepover percentage (how much you want your tool to overlap on each pass).
•
Press the
USE
key.
Note:
If your tool size and type listed in the "Tool" field are incorrect, change the tool
settings before running your program (refer to Programming a Tool Step).