Program steps, Operation manual – ACU-RITE MILLPWR 3 Axes User Manual

Page 130

Text mode
Original mode

PROGRAM STEPS

MILLPWR

Operation Manual

5-34

Corner

Enter the X- and Y-axes coordinates for the 2

Corner (located diagonally from

the 1

corner).

Hole Spacing

Specify the spacing between holes along the X- and Y-axes.

Tilt Angle

Enter a tilt angle, if needed.

•

Press the

USE

key.

Note:

If the tool size and type listed in the "Tool" field are incorrect, change the
tool settings before running your program (refer to Programming a Tool Step).