ACU-RITE MILLPWR 3 Axes - Manual (Page 24)

DRO
MILLPWR ®
Operation Manual 2-1
DRO
Start Up
Power Up
Press the power switch (located on the rear of the operator console) to “I.” The Power
Indicator (located in the upper left corner of the operator console) will light up green.
Once MILLPWR has been powered up, the following screen will appear:
Anytime your system is inactive for approximately 90 minutes, the LCD
display will shut off, and a blank screen will appear. This screen saver
function is designed to prolong the life of your operator console display.
If your screen is blank, check that the Power Indicator light is illumi-
nated. Press any key on the operator console or move the table and the
display will reappear. If the Power Indicator light is not illuminated yel-
low, then power to your
MILLPWR system has been interrupted.
Screen Saver