Program steps – ACU-RITE MILLPWR 3 Axes User Manual
Page 136
PROGRAM STEPS
MILLPWR
®
Operation Manual
5-40
To program a rotate:
•
From the PGM screen, press
the
MORE STEPS
softkey
•
Press the
ROTATE
softkey.
•
Enter the first and last steps in the range of steps that you
would like to rotate.
•
Enter the X- and Y-axes coordinates for the center point of
rotation.
•
Enter an offset for the Z-axis.
•
Enter the angle for each rotation.
•
Enter the number of times you want to rotate the shape. If you just want to rotate the
original program or sections of your program you’re working with, enter “0.” If you
want additional rotations of your original, enter the number of rotations that you
want in addition to your original.
•
Press the
USE
key.
Rotate
With “Rotate,” you can rotate whole programs
or sections of programs.
Condition: The steps rotated must
precede the “Rotate” step.