Program steps – ACU-RITE MILLPWR 3 Axes User Manual

Page 119

Text mode
Original mode

PROGRAM STEPS

MILLPWR

Operation Manual

5-23

•

If you want to program a finish cut, press the

MORE

softkey.

Enter the amount of material to be removed during the finish cut.

Enter the feed rate for the finish cut.

Select the finish cut's direction. Press the

softkey for a clock-

wise direction or the

CCW

softkey for a counter-clockwise

direction.

Enter a stepover percentage (how much you want your tool to overlap on each pass).

•

Press the

USE

key.

Note:

If the tool size and type listed in the "Tool" field are incorrect, change the tool settings
before running your program (refer to Programming a Tool Step).