ACU-RITE MILLPWR 3 Axes - Manual (Page 43)

PROGRAMMING
MILLPWR ®
Operation Manual 3-7
The View Key
If you need to see your part-graphic in more detail, press the VIEW key. This enables you to
access the following softkeys:
The FOLLOW TOOL , SHOW TOOL PATH and ZOOM functions may be used simultaneously.
Press the VIEW key (or the CANCEL key) at any time to return to the PGM screen.
FOLLOW TOOL
Press both the FOLLOW TOOL and ZOOM IN softkeys to see a close-up of the tool’s path.
MILLPWR will automatically adjust the part graphic so that the tool is always in view.
SHOW TOOL PATH
The SHOW TOOL PATH softkey shows the tool's cutting path as you run the program. With
this feature enabled, you can see where the tool has been.
ZOOM IN, ZOOM OUT and RESTORE
The ZOOM IN softkey will magnify the part graphic. The arrow keys will enable you to
adjust the view up, down, left and right. The ZOOM OUT softkey will de-magnify your part
graphic. RESTORE will return the part graphic to its original size.