Program steps – ACU-RITE MILLPWR 3 Axes User Manual

Page 125

Text mode
Original mode

PROGRAM STEPS

MILLPWR

Operation Manual

5-29

•

If you need to program a start angle and/or a number of
revolutions, press the

MORE

softkey.

Start Angle

Enter the angle where the helix begins (3 o’clock
position is 0 degrees; 12 o’clock position is 90 degrees).

Revolutions

Enter the number of revolutions.

•

Press the

USE

key.

Note:

If your tool size and type listed in the "Tool" field are incorrect, change the tool
settings before running your program (refer to Programming a Tool Step).