ACU-RITE MILLPWR 3 Axes - Manual (Page 219)

SETUP
MILLPWR ®
Operation Manual 7-39
Max Servo Speed
MILLPWR can move each axis a maximum of 100 inches per minute (IPM). This parameter
allows you to establish a lower maximum speed for the X, Y, axes and/or the Z axis.
To lower the maximum servo speed
• Using the arrow keys, highlight the X-Y SPEED IPM field.
• Using the keypad, enter the new speed for the X, and Y, axes in inches per minute.
• Using the arrow keys, highlight the Z SPEED IPM field.
• Using the keypad, enter the new speed for the Z axis in inches per minute.
• Continue with setup or press the USE NEW SETTINGS softkey.