Setup, Operation manual – ACU-RITE MILLPWR 3 Axes User Manual
Page 195
SETUP
MILLPWR
®
Operation Manual
7-15
To start the job clock:
•
From Setup, highlight “Job Clock” then press the
ENTER
key.
•
Press the
START
softkey, and the job clock will begin.
To stop the job clock:
•
From Setup, highlight “Job Clock” then press the
ENTER
key.
•
Press the
STOP
softkey, and the job clock will stop. The job clock’s current time will
be added to the value in the“Elapsed Time” field.
•
To restart the job clock, press the
START
softkey.
To reset the job clock and the “Elapsed Time” field:
•
From Setup, highlight “Job Clock” then press the
ENTER
key.
•
Press the
RESET
softkey, and the job clock and “Elapsed Time” field will be cleared.
Job Clock
Note: The maximum
amount of time that the
job clock will record is
99 hours, 59 minutes
and 59 seconds. The
value will then roll
over to zero and con-
tinue counting.