3Com 3500 - Manual (Page 98)

98 C HAPTER 3: S YSTEM E NVIRONMENT
system serialPort
3500
9000
✓
9400
✓ 3900
✓ 9300
serialPortMode
Configures the system serial port to establish either a terminal connection
or a modem connection.
Valid Minimum Abbreviation
sy se s
Options
Procedures
To change the serial port configuration from
console
to
modem
, perform
the following steps:
1 Change the serial port configuration from
console
to
modem
.
2 Disconnect the console cable.
3 Connect the modem cable.
The system is ready for you to establish a modem connection. See
“system serialPort configModem” next for details.
To change the serial port configuration from
modem
to
console
, perform
the following steps:
1 Change the serial port configuration from modem to console .
2 Disconnect the modem cable.
3 Connect the console cable.
The system is ready for you to establish a console connection. (See
“system serialPort baudRate” earlier in this chapter.)
Prompt Description Possible Values [Default]
Serial port Type of serial port
configuration that you want
■
console
■
modem
console