3Com 3500 - Manual (Page 357)

bridge vlan modify (3500/9000 Layer 3) 357
Protocol
suite
(for VLANs
other than
the default)
One or more protocol suites
that you want to specify for the
VLAN
■
IP
■
IPX
■
Apple (for
AppleTalk)
■
XNS
■
DECnet
■
SNA
■
Vines
■
X.25
■
NETBEUI
■
unspecified
■
IPX-II
■
IPX-802.2
■
IPX-802.3
■
IPX-802.2-SNAP
(3500 only)
Current
protocol type
Modify
Layer 3
address
(IP VLAN) Whether you want to modify
the Layer 3 information for the
VLAN
Avoid this mechanism and
instead define multiple IP
interfaces per VLAN with
ip
interface define
commands.
■
y (yes)
■
n (no)
y
Layer 3
address and
mask
(IP VLAN) Optional fields (IP network and
mask) used to set up flood
domains for overlapping IP
VLAN subnetworks Any valid IP
network address
and mask Current address
and mask
Per-port
tagging Whether you want to modify
the per-port 802.1Q VLAN
tagging. You are prompted to
answer for each port that you
specified.
■
y (yes)
■
n (no)
y
Tag type Either no tagging or
IEEE 802.1Q tagging (the VID)
■
none
■
802.1Q
Current tag
type for each
port
VLAN name
(for VLANs
other than
the default)
Unique, user-defined name
that identifies members of the
VLAN. If you use spaces, put
quotation marks around the
VLAN name. Up to 32 ASCII
characters or
spaces Current name
Prompt Description Possible Values [Default]