3Com 3500 - Manual (Page 558)

558 C HAPTER 19: O PEN S HORTEST P ATH F IRST (OSPF)
ip ospf linkStateData
✓
3500
✓
9000
9400
3900
9300
router
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays router link state advertisements (LSAs) in the link state database.
Valid Minimum Abbreviation
ip o l r
Important Consideration
■
To view link state database information, OSPF must be
active (enabled).
Options
Fields in the IP OSPF Link State Data Router Display
Prompt Description Possible Values [Default]
Area ID Area ID (in the form
n.n.n.n where 0 <= n <= 255)
that corresponds to the OSPF
area for which you want to
view router link state
advertisement information Valid area ID 0.0.0.0 (factory
default), or
current value
Area mask Subnet mask of OSPF area for
which you want to view router
link state advertisement
information Valid area mask 0.0.0.0 (factory
default), or
current value
LSID Link State ID: router ID of the
originating router (in the form
of an IP address) Router ID 0.0.0.0 (factory
default), or
current value
LSID mask Link State ID bit mask
(Example: 255.0.0.0) Link State ID bit
mask 0.0.0.0 (factory
default), or
current value
Field Description
Flags
■ V — Router is the endpoint of an active virtual link that
is using the area as a transmit area.
■ ASBR — Router is an autonomous system boundary
router.
■ ABR — Router is an area border router.