3Com 3500 User Manual
Page 185
management ip advancedTraceRoute
185
Management IP Advanced Trace Route Example (TTL value of 10):
sourceAddress
Source address other than the
one from which the probe
packets originate. This option is
available if you have more than
one IP interface defined on the
system.
■
n (no)
■
y (yes)
y
Interface index Index number of the ICMP source
IP address that you want to use.
The system lists defined interfaces
and their indexes.
A selectable
interface
0 (the router
picks the
best
interface)
Numeric mode Whether the system shows hop
addresses numerically or
symbolically.
■
disabled
■
enabled
default
Prompt
Description
Possible
Values
[Default]
Select menu option (ip): advancedTraceRoute
Enter host IP address [158.101.101.27]:
Enter maximum Time-to-Live (ttl) (1-255) [30]: 10
Enter Destination Port number (30000-65535) [33434]:
Enter the number of probes to be sent at each ttl level (1-10) [3]:
Enter time (sec) to wait for a response (1-10) [3]:
Enter the packet size (bytes) (28-4096) [28]:
Configure TRACEROUTE sourceAddress? (n,y) [y]:
Index Interface address
0 Best interface (default)
1 158.101.117.151
2 158.101.10.1
Select interface index {0-2|?} [0]:
Enter Numeric mode (disabled,enabled) [disabled]:
Press "Enter" key to interrupt.
Traceroute to 158.101.101.27: 10 hops max, 28 bytes packet
1 158.101.117.254 12 ms 7 ms 5 ms
2 158.101.112.254 51 ms 9 ms 7 ms
3 158.101.96.22 21 ms 15 ms 6 ms
4 158.101.101.27 18 ms 90 ms 80 ms