3Com 3500 - Manual (Page 561)

ip ospf linkStateData summary 561
ip ospf linkStateData
✓
3500
✓
9000
9400
3900
9300
summary
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Displays summary link state advertisements (LSAs) in the link state
database.
Valid Minimum Abbreviation
ip o l s
Important Consideration
■
To view link state database information, OSPF must be
active (enabled).
Options
Prompt Description Possible Values [Default]
Area ID Area ID (in the form
n.n.n.n where 0 <= n <= 255)
that corresponds to the OSPF
area for which you want to
view summary LSA information Valid area ID 0.0.0.0 (factory
default), or
current value
Area mask Subnet mask of the OSPF area
for which you want to view
summary LSA information Valid area mask 0.0.0.0 (factory
default), or
current value
LSID Link State ID:
■
For type 3 summary LSAs,
this is the IP address of the
destination network
■
For type 4 summary LSAs,
this is the autonomous
system boundary router’s
Router ID (in the form of an
IP address)
■
For type 3
summary LSAs,
a valid IP
address
■
For type 4
summary LSAs,
a valid router ID
0.0.0.0 (factory
default), or
current value
LSID mask Link State ID bit mask
(Example: 255.0.0.0) Link State ID bit
mask 0.0.0.0 (factory
default), or
current value