3Com 3500 - Manual (Page 362)

362 C HAPTER 14: V IRTUAL LAN S (VLAN S )
Bridge VLAN Modify Example (9000 Layer 2)
This example shows the removal of two ports from a port-based VLAN
that includes tagged front-panel ports and a tagged backplane port
(port 21).
CB9000@slot 10.1 [20-E/FEN-TX-L2] (bridge/vlan): modify
Select VLAN interface index {1-3|?}: 3
Enter VID (2-4094) [3]: 3
Select bridge ports (1-22|all|?) [1-5,21]: 1-3,21
Configure per-port tagging? (n,y) [y]: y
Enter port 1 tag type (none,802.1Q) [802.1Q]: 802.1Q
Enter port 2 tag type (none,802.1Q) [802.1Q]: 802.1Q
Enter port 3 tag type (none,802.1Q) [802.1Q]: 802.1Q
Enter port 21 tag type (none,802.1Q) [802.1Q]: 802.1Q
Enter VLAN Name {?} [vlan3]: vlantag3
Bridge VLAN Modify Example (3900)
This example shows default VLAN changes in the ports and per-port
tagging type.
Select menu option (bridge/vlan): modify
Select VLAN interface index {1-2|?}: 1
Select bridge ports (1-27|all|?) [1-27]: 2-6
Modify per-port tagging? (n,y) [y]:
Enter port 2 tag type (none,802.1Q) [none]: 802.1Q
Enter port 3 tag type (none,802.1Q) [none]: 802.1Q
Enter port 4 tag type (none,802.1Q) [none]: 802.1Q
Enter port 5 tag type (none,802.1Q) [none]: 802.1Q
Enter port 6 tag type (none,802.1Q) [none]: 802.1Q