3Com 3500 - Manual (Page 229)

fddi path display 229
✓ 3500
✓ 9000
9400
3900
9300
fddi path display Displays FDDI path information.
Valid Minimum Abbreviation
fd pa d
Important Consideration
■
The path display changes slightly when ports are configured as DAS
ports.
Fields in the FDDI Path Display
Options
Field Description
maxTReq Maximum time value of fddiMACT-Req that any MAC
that is configured in this path uses. This value can be
user-defined.
path Current selected path.
ports Ports numbers that are assigned to the FDDI module. The
FDDI port numbers change depending on the
configuration of your system.
ringLatency Total accumulated latency of the ring that is associated
with this path.
tmaxLowBound Minimum time value of fddiMACT-Max that any MAC
that is configured in this path uses. This value can be
user-defined.
traceStatus Current trace status of the path.
tvxLowBound Minimum time value of fddiMACTvxValue that any MAC
that is configured in this path uses. This value can be
user-defined.
Prompt Description Possible Values [Default]
Ports One or more FDDI station ports
for which you want to set the
path display
■
Any of the
available ports
on the installed
FDDI modules
■
all
–
Path Path that you want to set.
■
A DAS port has primary and
secondary paths.
■
A SAS port has only a
primary path.
■
p (primary)
■
s (secondary)
■
all
–