3Com 3500 - Manual (Page 331)

bridge link define 331
Options
Procedure
You can define all links in one
bridge link define
operation and then
reboot. At the end of each link definition, the system prompts you to
define another link.
1 Enter the link name, or to get information about specifying the link
name, enter
?
2 Select the port that you want to be the main port.
To get information about the selectable ports, enter ?
3 Select the port that you want to be the standby port.
To get information about the selectable ports, enter
?
4 At the system prompt, to define another link enter y (yes), or to end the
link define sequence, enter
n
(no).
You must reboot for the links to take effect.
Prompt Description Possible Values [Default]
Resilient link
name Name of the link. Use
quotation marks around any
character string that contains
spaces Maximum 32
alphanumeric characters –
Main Port Main port that you want to be
part of the link. Any of the available
ports on the system –
Standby
Port Standby port that you want to
be part of the link. Any of the available
ports on the system –
Define
another
link? Whether you want to define
another link.
■
y (yes)
■
n (no)
n
Reboot the
system? Resilient links that you define
do not take effect until you
reboot the system.
■
y (yes)
■
n (no)
y