3Com 3500 - Manual (Page 668)

668 C HAPTER 21: A PPLE T ALK
Start of
network
range Start of the network range that
is associated with the seed
interface. Seed interfaces only. 1 – 65279 Current value
End of
network
range End of the network range that
is associated with the seed
interface. Seed interfaces only. 1 – 65279 Current value
Default
zone name User-defined default AppleTalk
zone name. Clients that have
not been configured to use a
particular zone use the default
zone name. Seed interfaces
only. Up to 32 ASCII
characters Current value
Zone name First AppleTalk zone that is
associated with the interface.
You are then prompted to
enter up to 15 additional zone
names. Seed interfaces only.
■
Up to 32 ASCII
characters
■
q (to quit
specifying zone
names and
move on to the
VLAN interface
index prompt)
Current value
VLAN
interface
index Index number of the VLAN that
you want to associate with the
AppleTalk interface. When the
system prompts you for a
VLAN interface index, it
indicates the available VLANs
that you can associate with a
new AppleTalk interface.
■
Available valid
VLAN index
number
■
? (for a list of
selectable
indexes)
Current value
Interface
down time Number of minutes that you
want to bring down the
AppleTalk interface after you
change zone information. This
prompt appears only when you
modify the zone information
that is associated with the
interface. 1 – 120 minutes –
Prompt Description Possible Values [Default]