3Com 3500 User Manual
Page 209

ethernet detail
209
linkStatus
Boolean value that indicates the current state of the physical
link for this port (either
enabled
or
disabled
).
macAddress
MAC address of this port.
multiCollisions
(3500, 3900 and
9000 Layer 3)
Number of frames that have experienced from 2 to 15
consecutive collisions before successful transmission from this
port. If a frame also experiences a collision on the 15th attempt,
it is dropped and the excessCollision count is increased by 1.
noRxBuffers
Number of frames that were discarded because no buffer space
was available.
oversized
(3900, 9000
Layer 2, 9300 and
9400)
Number of frames received by this port that were longer than
1518 bytes.
paceAccess
(3900 and 9000
Layer 2)
Whether PACE
®
Interactive Access is
enabled
or
disabled
for this port.
portLabel
User-defined label name. The maximum length of the string is
32 characters, including the null terminator.
portState
Current software operational state of this port. Possible values
are
on-line
,
off-line
,
partitioned
,
tx-fault
, and
config-error
. The value
on-line
appears when the port
is both enabled and connected to a cable. The value
partitioned
appears when the port has been disabled by
the ethernet port monitoring feature.
portType
Specific description of this port’s type. Values for each port
type:
10/100BASE-T(RJ45)
,
100BASE-FX (SC)
,
1000BASE-SX (SC)
,
1000BASE-LX (GBIC)
,
1000BASE-SX (GBIC)
,
Backplane
(9000).
reqFlowControl
Configurable parameter that sets the flow control option (when
autonegotiation is disabled). When autonegotiation is enabled,
flow control values are ignored.
reqPortMode
Port mode on Ethernet ports that have port mode options
(when autonegotiation is disabled). When autonegotiation is
enabled, port mode values are ignored.
requestedState
Configurable parameter that is used to enable and disable this
port. The default is
enabled.
runts
(3900, 9000
Layer 2, 9300 and
9400)
Number of frames received by this port that were shorter than
64 bytes.
rxBroadcast
(3900, 9000
Layer 2, 9300 and
9400)
Number of broadcasts received by this port.
Field
Description