3Com 3500 - Manual (Page 459)

ip rip password 459
✓ 3500
✓ 9000
9400
3900
9300
ip rip password For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Sets the IP RIP-2 password so that you can choose the IP interfaces that
can put RIP-2 updates into their routing tables.
Valid Minimum Abbreviation
ip ri pa
Important Considerations
■
If the sending interface has an IP RIP-2 password, the receiving
interface must have the same IP RIP-2 password. If the receiving
interface has a different password or a null password, its routing table
is not updated.
■
If you are using RIP-1, do not use the password option.
■
You cannot use the ASCII string
none
as the password. This string is
reserved to indicate the default password, which is a null value.
Options
IP RIP Password Example
Select menu option (ip/rip): password
Select IP interfaces (1,2|all|?): 1
Interface 1 - Enter password {?} [none]: wings
Prompt Description Possible Values [Default]
IP interfaces Index number of the IP interfaces
that you want to allow to receive
route updates
■
One or more
selectable
interface indexes
■
all
■
? (for a list of
selectable
interface
indexes)
–
Password Combination of characters that
you set as the RIP-2 password
■
up to 16
alphanumeric
characters
■
null password
null
password