3Com 3500 - Manual (Page 339)

bridge vlan summary 339
■
GVRP is based on IEEE 802.1Q and allows for dynamic configuration
of port-based VLANs. GVRP can help you simplify the management of
VLAN configurations in larger networks. Use the command
bridge port gvrpState to explicitly enable GVRP on the
participating bridge ports and use the command
bridge gvrpState
to enable the bridge GVRP state for the entire system. The bridge
GVRP state enables you to control GVRP on the system without losing
the per-port GVRP state. By default, the GVRP state for the entire
system is
disabled and the GVRP state for each bridge port is
disabled
.
■
The system prompts you for a VLAN interface index number before it
displays the summary information.
Options
Fields in the Bridge VLAN Summary Display
Prompt Description Possible Values [Default]
VLAN interface
index Index numbers
of the VLAN
interfaces for
which you want
summary
information
■
One or more selectable VLAN
interface index numbers
■
all
■
? (for a list of selectable
indexes)
1 (if you
have only
one VLAN)
Field Description
Index System-assigned index number that identifies a VLAN of the
identified origin. Statistics appear in the display for the VLAN that
you specify.
Name Character string of from 0 through 32 bytes that identifies the
VLAN. The default VLAN always uses the name Default .