3Com 3500 - Manual (Page 696)

696 C HAPTER 22: Q UALITY OF S ERVICE (Q O S) AND RSVP
Source IP
address mask For flow classifiers
only, source IP
address mask, or
how many portions
of the IP address you
want to match
(Example:
255.255.255.0
matches the first
three portions of the
specified IP address.) Up to four portions
(255.255.255.255) 0.0.0.0
(factory
default)
Destination IP
address For flow classifiers
only, destination IP
address Up to 255.255.255.255 0.0.0.0
(factory
default,
wildcard
match)
Destination IP
address mask For flow classifiers
only, destination IP
address mask, or
how many portions
of the address you
want to match Up to four portions
(255.255.255.255) 0.0.0.0
(factory
default,
wildcard
match)
Start and end
of TCP or UDP
source port
range For flow classifiers
only, start and end
of the TCP or UDP
source port range.
The start value
determines the end
value.
■
0 – 65535 (start)
■
2049 – 65535 (end)
See “QoS Classifier Define
Example (Flow Classifier)”.
0 and
65535
(factory
defaults)
Start and end
of TCP or UDP
destination
port range For flow classifiers
only, start and end
of the TCP or UDP
destination port
range. The start
value determines the
end value.
■
0 – 65535 (start)
■
2049 – 65535 (end)
See “QoS Classifier Define
Example (Flow Classifier)”.
0 and
65535
(factory
defaults)
Additional
filter
(address/port
pattern) For flow classifiers
only, additional
source, destination,
and port information
for this classifier
■
y (yes)
■
n (no)
no (factory
default)
Custom
protocol type
(custom
nonflow
classifiers only) For nonflow
classifiers with the
custom protocol
type
■
Ethertype
■
DSAP/SSAP
–
Prompt Description Possible Values [Default]