3Com 3500 - Manual (Page 717)

qos control define 717
10 Enter the classifiers that are subject to this control.
The system displays the available classifiers in parentheses. If you select
aggregate as the rate limit type, or if you said yes to the drop TCP
connection packets option, only flow classifiers appear in parentheses.
QoS Control Define Example (3500)
This example shows a control for a nonflow classifier. Because the control
has a rate limit of
none , the system does not prompt you for information
that applies to the other rate limit types.
Select menu option (qos/control): define
Enter control number {5-50|?} [5]:
Enter control name {?}: definetest
Enter rate limit type (none,receivePort,aggregate) [none]:
Enter service for conforming packets (high,best,low,drop)
[best]:
Are conforming packets loss eligible (yes,no) [no]:
Select IEEE 802.1p tag to apply to forwarded frames.
Tag {0-7|none|?} [none]:
Drop packets used to establish a TCP connection (yes,no)
[no]:
Set start and end time for the control (yes,no) [no]: yes
Enter input time type
(specific,daily,dayoftheweek,everydayoftheweek,weekdays,
weekends,everyweekdays,everyweekends) [specific]: weekdays
Enter the Qos control starting time (hh:mm): 09:00
Enter the Qos control ending time (hh:mm): 17:00
Select classifiers which are subject to this control.
Enter classifiers (20,23,420,430,440,450,4...: 450