3Com 3500 - Manual (Page 184)

184 C HAPTER 5: O UT -O F -B AND M ANAGEMENT
management ip
✓
3500
9000
9400
3900
9300
advancedTraceRoute
Traces a route to a host with one or more of the advanced traceRoute
options.
Valid Minimum Abbreviation
m ip advancedT
Important Considerations
■
When you specify a host name, the host name and its associated IP
address must be configured on a network name server. Also, you must
add the IP address on the name server to the list of name server
addresses that are associated with the network domain name. See “ip
dns define” in Chapter 16 for more information.
■
To interrupt the command, press Enter.
Options
Prompt Description
Possible
Values
[Default]
Host name or
IP address Host name or IP address of the
destination that you want to ping
■
A valid
host
name
■
IP
address
0.0.0.0
Maximum ttl Maximum number of hops that
the system can use in outgoing
probe packets 1 – 255
hops 30
Destination
port Destination (or base) UDP port
number that the system uses in
probe packets. Set the destination
UDP port number to be very high
to ensure that an application at
the destination is not using that
port. 30000 –
65535 33434
probeCount Maximum number of probes that
the system sends at each TTL level 1 – 10 3
Wait Wait interval (in seconds) that
determines the maximum amount
of time that the system waits for a
response to a probe 1 – 10
seconds 3
packetSize Number of bytes that the system
sends in each UDP probe packet 28 – 4096
bytes 28