Management detail – 3Com 3500 User Manual
Page 153
management detail
153
✓
3500
9000
✓
9400
3900
✓
9300
management detail
Displays Ethernet detailed information about the out-of-band system
management port.
Valid Minimum Abbreviation
m det
Important Considerations
■
The
management summary
and
management detail
displays contain
the same fields as the Ethernet
summary
and Ethernet
detail
displays.
■
Fields that do not apply to the management port contain
n/a
in the
management summary
and
management detail
displays.
Fields in the Management Detail Display
Field
Description
actualFlowControl
Actual flow control setting for the port. When
autonegotiation is completed, the value is the
autonegotiated setting. When autonegotiation is
disabled, the value is the user-selected flow control value.
actualPortMode
Actual operating port mode. When autonegotiation is
completed, the value shown is the autonegotiated setting.
When autonegotiation is disabled, the value is the
user-selected port mode.
alignmentErrs
Number of frames received by this port that are not an
integral number of octets in length and do not pass the
FCS check
autoNegMode
Autonegotiation mode configured for port. Possible
values are
enabled
or
disabled
.
autoNegState
Current negotiation state. Possible values are
disabled
,
configuring
,
completed
, and
failed
.
carrierSenseErr
Number of frames discarded because the carrier sense
condition was lost while attempting to transmit a frame
from this port
collisions
Number of collisions detected on this port
excessCollision
Number of frames that could not be transmitted on this
port because the maximum allowed number of collisions
was exceeded
excessDeferrals
Number of frames that could not be transmitted on this
port because the maximum allowed deferral time was
exceeded
fcsErrs
Number of frames received by this port that are an
integral number of octets in length but do not pass the
FCS check