3Com 3500 - Manual (Page 305)

bridge trunk detail 305
✓ 3500
✓ 9000
✓ 9400
✓
3900
✓
9300
bridge trunk detail Displays detailed trunk information in addition to the summary
information.
Valid Minimum Abbreviation
b t det
Fields in the Bridge Trunk Detail Display
Field Description
FlowC For Gigabit Ethernet trunks, the flow control setting ( on,
off, rxOn, txOn ). For other media types, the field
contains n/a to indicate that flow control does not apply.
Index Identifying number for the system or module that the
system assigned to the trunk.
Missing Number of ports that are configured for the trunk, but are
missing because an interface module is inaccessible.
Mode Operating mode: 100half or 100full for Fast
Ethernet and 1000full for Gigabit Ethernet.
Name Trunk name that you defined.
Node trunk id TCMP identifier that the system assigned to the trunk.
Node trunk id list Node trunk identifications that each port has detected on
the trunk.
Ports Ports in the trunk. The second half of the display lists each
individual port in each trunk.
Present Number of ports that participate in the trunk.
rxBadType Number of TCMP messages received that contain a bad
TCMP Type field.
rxBadVersion Number of TCMP messages received that contain a bad
TCMP version number.
rxFrames Number of TCMP messages that were received on each
port.
rxHellos Number of TCMP helloMessages that were received on
each port.
rxOverflow Number of times that TCMP has detected a TCMP trunk
configuration that exceeds the eight-node maximum.
rxSameTrunkId Number of times that TCMP has received a helloMessage
that contains the TCMP agent’s own Node trunk id (an
illegal configuration).
Selected node trunk id
list Node trunk identifications that are selected for use on the
trunk.
State Whether the trunk is up or down .