3Com 3500 - Manual (Page 173)

management ip rip display 173
management ip rip
✓
3500
9000
9400
3900
9300
display
Displays information about the Routing Information Protocol (RIP)
interfaces on the system. RIP is one of the IP Interior Gateway Protocols
(IGPs). When enabled, RIP allows the system to dynamically configure its
routing tables.
Valid Minimum Abbreviation
m ip ri d
Important Considerations
■
The first line in the output (the status line) indicates whether IP routing
is enabled (in-band only):
■
IP interface options (such as ICMP router discovery) appear under
ip interface detail and are set on a per-interface basis. The
rest of the output contains more RIP interface information.
■
The two available RIP modes are as follows:
■
Disabled — The system ignores all incoming RIP packets and does
not generate any RIP packets of its own.
■
Learn — The system processes all incoming RIP packets, but it
does not transmit RIP updates.
Fields in the Management IP RIP Display
Field Description
Index Index number of the interface
RIP-1 mode Mode for RIP-1. If you disable RIP-1, the output lists
the state as
off . Other modes are learn
(default), advertise , and enabled .
RIP-2 mode Mode for RIP-2. If you disable RIP-2, the output lists
the state as
off . Other modes are learn
(default), advertise , and enabled .