3Com 3500 - Manual (Page 601)

ip ospf policy modify 601
OSPF Export Policy Conditions
Export Policy Conditions for Direct Routes
IP OSPF Policy Modify Example
Select menu option (ip/ospf/policy): modify
Select policy {1|?} [1]:
Enter origin protocols (dir,sta,rip|all|?) [rip]:
Enter source address [0.0.0.0]:
Enter route address [0.0.0.0]:
Enter policy action (accept,reject) [accept]:
Enter metric adjustment ([+,-,*,/,%]0-65535) [0]:
Enter administrative weight (1-16) [1]:
Enter ASE type (type1,type2) [type1]:
Protocol
Source
Router
Route Action Description
RIP or static Specified
router or all
routers
Specified
route/mask accept Advertise in external LSAs
specified RIP/static route from
specified router with or
without metric adjustments
(+, -, *, /, %).
RIP or static Specified
router or all
routers
all (0.0.0.0) accept Advertise in external LSAs all
RIP/static routes from
specified router with or
without metric adjustments
(+, -, *, /, %).
RIP or static Specified
router or all
routers
Specified
route/mask reject Do not advertise in external
LSAs RIP/static routes from
specified router(s).
RIP or static Specified
router or all
routers
all (0.0.0.0) reject Do not advertise in external
LSAs any RIP/static route from
specified router(s).
Protocol Interface Action Description
Direct Specified
non-OSPF
interface or
All non-OSPF
interfaces accept Advertise in external LSAs all direct
routes off of specified interfaces.
Direct Specified
non-OSPF
interface or
All non-OSPF
interfaces reject Do not specify in external LSAs any direct
routes off of specified interfaces.