3Com 3500 - Manual (Page 337)

14
V
IRTUAL
LAN
S
(VLAN
S
)
A virtual LAN (VLAN) is a logical definition of a network work group. It is
roughly equivalent to a broadcast domain. A VLAN interface is your
system’s point of attachment to a given VLAN. A VLAN and a VLAN
interface are analogous to an IP subnetwork and an IP interface.
For more information about VLANs, see the Implementation Guide for
your system.
Menu Structure The commands that you can use depend on the system that you have,
your level of access, and the types of modules and other hardware
options that are configured for your system. The following diagram
shows the complete list of commands for all systems. See the checklist at
the beginning of each command description in this chapter for whether
your system supports the command.
The bridge vlan stpMode command is available only when you enable
allClosed mode on the CoreBuilder ® 3500 system or the
CoreBuilder 9000 Layer 3 switching modules. The command does not
appear when you are using the default VLAN mode (allOpen) or when
you use allClosed mode on a Layer 2 system or module.
bridge menu
display
ipFragmentation
ipxSnapTranslation
addressThreshold
agingTime
spanningTree
gvrpState
cos
port
multicast
packetFilter
➧ vlan
trunk
mpla
link
Top-Level Menu
system
module
management
ethernet
fddi
➧ bridge
ip
ipx
appletalk
qos
snmp
analyzer
log
script
logout
disconnect
vlan menu
summary
detail
define
modify
remove
mode
stpMode
vlanAwareMode