3Com 3500 - Manual (Page 302)

302 C HAPTER 11: T RUNKS
bridge trunk
autoMap
3500
✓ 9000
9400
3900
9300
enable/disable
Dynamic backplane trunking provides automatic backplane trunking on
the switch fabric modules and managed interface modules.
Valid Minimum Abbreviation
b t a e
Important Considerations
■
You can enable or disable the autoMap function on slots.
■
All trunking is performed through the switch fabric module.
■
Do not perform backplane trunking through the interface modules.
■
When you enable autoMap on a module in a specific slot, the switch
fabric module verifies that the switch fabric module and the interface
module’s backplane configuration support dynamic backplane
mapping.
■
When you disable autoMap on a module in a specific slot, the switch
fabric module verifies that the interface module’s backplane
configuration is compatible with that of the switch fabric module’s
backplane.
Options
Prompt Description Possible Values [Default]
Slot number Slot number to choose to
enable or disable autoMap
function One slot number –