3Com 3500 - Manual (Page 633)

ipx rip policy define 633
✓ 3500
✓ 9000
9400
3900
9300
ipx rip policy define For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Define a RIP (Routing Information Protocol) policy.
Valid Minimum Abbreviation
ipx ri p d
Important Considerations
■
Every router maintains a table of current routing information in a
routing table.
■
Routing protocols receive or advertise routes from the network.
■
Routing Policies control the flow of routing information between the
network, the protocols, and the routing table manager.
Prompt Description Possible Values [Default]
Type Type of the policy: Import
(apply the policy to received
routes) or Export (apply the
policy to advertised routes).
■
Import
■
Export
Import
Route
Origin Origin of the route to which
this policy applies. This
parameter is valid only if the
policy Type is set to Export.
■
Dir
■
Static
■
RIP
■
All
All
Route
address Route to which this policy
applies.
■
0x1-0fffffffe
■
All
All
IP interfaces One or more IP interfaces on
this router associated with the
RIP policy.
One or more IP
interface numbers All
Source node
address 6-byte MAC address of the
router that can forward
packets to the network. A
node address of all zeroes
(
00-00-00-00-00-00 )
means that the route is
connected directly to the
router.
■
A node address in
the format
xx-xx-xx-xx-xx-xx
■
All
All
Policy action Whether this router accepts or
rejects a route that matches
the policy.
■
Accept
■
Reject
Accept