3Com 3500 - Manual (Page 261)

bridge spanningTree stpPriority 261
bridge spanningTree
✓
3500
✓
9000
✓
9400
✓ 3900
✓ 9300
stpPriority
Modifies the bridge priority, which influences the choice of the root and
designated bridges.
Valid Minimum Abbreviation
b sp stpp
Important Considerations
■
The bridge priority is expressed as a hexidecimal value. The characters
Ox signify this.
■
The lower the bridge’s priority value, the more likely it is that the
bridge is chosen as the root bridge or a designated bridge.
■
You can change the value while STP is disabled or enabled. If you
change the value while STP is disabled, the value is retained when you
enable STP.
Options
Prompt Description Possible Values [Default]
STP priority Bridge-wide STP parameter 0x0 – 0xffff 0x8000 (factory
default), or
current value