3Com 3500 - Manual (Page 129)

module display 129
3500
✓ 9000
9400
3900
9300
module display Generates software and hardware revision numbers, module status
information, and warning messages for certain module conditions.
Valid Minimum Abbreviation
mo d
Important Considerations
■
The module display provides the configuration information for the
module to which you are currently connected. To display configuration
information for another module, disconnect from the current module
through the Enterprise Management Engine (EME) and then connect
to the module that you want to display.
■
After you have logged in to the EME, you can access the module that
you want to manage.
■
Diagnostic messages appear in the display only if a module fails any of
the tests at start-up.
Fields in the Module Display
Field Description
24 port Gigabit
Switching Fabric 32-character alphanumeric name that uniquely identifies
this module
3C number Each module’s 3Com 3C product identification number
Built Date and time when this software version was built
Diagnostics Whether a module has passed or failed diagnostics.
Additional diagnostic messages describe a failure.
Memory size (AP, FP,
Flash, Buffer) Memory capacities of the processors
Module ID ID number that the system assigns to that module
Rev Unique number assigned to the hardware build by 3Com
Serial Each module’s unique serial number
Slot Location of the module in the chassis (slot.subslot)
System name Name of the system
System up time Time that this module has been up and running
Time in service Total operational time since the module was
manufactured
Version Software release number