3Com 3500 - Manual (Page 557)

ip ospf linkStateData databaseSummary 557
ip ospf linkStateData
✓
3500
✓
9000
9400
3900
9300
databaseSummary
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Summarizes link state advertisements (LSAs) in the link state database.
Valid Minimum Abbreviation
ip o l d
Important Consideration
■
To view link state database information, OSPF must be
active (enabled).
Options
Fields in the IP OSPF Link State Data Database Summary Display
Prompt Description Possible Values [Default]
Area ID Area ID (in the form
n.n.n.n where 0 <= n <= 255)
that corresponds to the OSPF
area for which you want to
view LSA summary information Valid area ID 0.0.0.0 (factory
default), or
current value
Area mask Subnet mask of OSPF area for
which you want to view LSA
summary information Valid area mask 0.0.0.0 (factory
default), or
current value
Field Description
Checksum summation Total of all LSA checksums
External LSAs Number of external link LSAs
LSA count Number of LSAs
Network LSAs Number of network link LSAs
Router LSAs Number of router link LSAs
Summary LSAs Number of summary link LSAs