3Com 3500 - Manual (Page 174)

174 C HAPTER 5: O UT -O F -B AND M ANAGEMENT
management ip rip
✓
3500
9000
9400
3900
9300
mode
On a per-interface basis, sets one of four RIP Version 1 (RIP-1) modes and
one of four RIP Version 2 (RIP-2) modes on the system.
Valid Minimum Abbreviation
m ip ri m
Important Considerations
■
The CoreBuilder 3500 supports RIP Version 1 as well as RIP Version 2.
For each interface, you select a RIP Version 1 mode and a RIP Version 2
mode. The default RIP Version 1 mode for all platforms is
learn . The
default RIP Version 2 mode for the CoreBuilder 3500 is
disabled
.
■
The four available RIP modes are as follows:
■
Disabled — The interface ignores all incoming RIP packets and
does not generate any RIP packets of its own.
■
Learn — The interface processes all incoming RIP packets, but it
does not transmit RIP updates. This is the default RIP mode.
■
Advertise — The interface broadcasts RIP updates, but it does not
process incoming RIP packets.
■
Enabled — The interface broadcasts RIP updates and processes
incoming RIP packets.
Options
Prompt Description Possible Values [Default]
IP interfaces Index number of the interface for
which you want to set the RIP
mode
■
Selected
interfaces
■
all
■
? (for a list of
selectable
indexes)
Previous
entry, if
applicable
RIP mode,
Version 1 Selected RIP Version 1 mode that
determines how the interface
handles RIP 1 packets and
updates
■
disabled
■
learn
■
advertise
■
enabled
learn, or
current
value
RIP mode,
Version 2 How the interface handles RIP 2
packets and updates
■
disabled
■
learn
■
advertise
■
enabled
disabled, or
current
value