Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 915)

Obtaining Status and Statistical Information
Page 29-43
Information on One Port
To obtain status information on a single WSX port, you enter the frstatus command along with
the slot number for the WSX board and the port number for which you want to receive infor-
mation, as follows:
frstatus /
where is the slot number where the WSX board is installed and is the port
number on the WSX board. For example, if you wanted to obtain status information for Port 1
on the WSX module in Slot 4, you would enter:
frstatus 4/1
This command displays a screen similar to the one shown on the following page: