Remove one or more key id's from the trusted list, Display the state of the authentication code, Field descriptions – Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 316

NTP Access Control Menu
Page 12-38
Remove One or More Key ID's from the Trusted List
The trusted list in the key file is a list of all keys that are considered authentic and uncompro-
mised. Messages from an
NTP
entity using one of these keys are accepted and acted upon. It
is possible to remove a key from the trusted list.
To remove a key ID from the trusted list, enter the
ntpdkey
command as shown:
ntpdkey
where
is the new key
ID
to be remove from the trusted list. For example, to remove
key
ID
5 from the trusted list, enter the following:
ntpdkey 5
A brief message is displayed confirming the operation.
♦ Note ♦
Removing a key
ID
using the
ntpdkey
command
removes the key from the working version of the key
file in the switch’s
RAM
. If you reset the switch or re-
initialize
NTP
, the removed key is reinstated.
Display the State of the Authentication Code
The
ntpauth
command allows you to look at the statistics of the authentication routine. These
statistics consist of counters for various functions of the authentication code.
To view the statistics of the authentication code, enter the
ntpauth
command at the system
prompt. A screen similar to the following is shown:
time since reset:
0
key lookups:
0
keys not found:
0
uncached keys:
0
encryptions:
0
decryptions:
0
Field Descriptions
The following sections explains the fields displayed using the
ntpauth
command.
time since reset
. The number of seconds since the last restart of the switch.
key lookups
. The number of times the switch has examined the key file to find a key.
keys not found
. The number of times the switch failed to find a key in its key file.
uncached keys
. The number of keys added to the key file using the
ntpckey
command.
encryptions
. The number of times the switch sent
NTP
messages or information out in
encrypted form.
decryptions
. The number of times the switch received
NTP
messages of information that was
encrypted, and successfully decrypted the information.